The Korg 1212 I/O Note: this information may also appear in your Metro User’s Guide, but is included here for your convenience. If you own a Korg 1212I/O audio card, you can use the audio card to record and play audio in Metro. Use the Digital Audio Setup dialog, reached through the Setup menu’s Digital Audio command, to configure Metro’s audio settings. In the Digital Audio Setup dialog, click Recording Settings to configure the Korg 1212 I/O card. You’ll see the following dialog box appear: Monitor On Click this checkbox to use play any incoming audio signal through the Korg 1212 I/O’s outputs. Input Gains We recommend you leave the input gain at 100% to get the clearest recordings. If your audio distorts when you record, reduce the volume of the incoming signal with an external mixer. Clock Source This setting determines whether Metro will synchronize its audio to the audio card or some other source. Record Left Use this setting to choose which incoming audio source on the 1212 I/O will be used for mono recording, or as the left channel in a stereo track. You can pick from any of the card’s combination of 12 analog, SPDIF or ADAT optical I/O inputs. Record Right Use this setting to choose which incoming audio source on the 1212 I/O will be used for the right channel in a stereo track.