Delay The Delay effect will help you add depth to a track (when the time interval is short), or can be used to provide a 'slapback' effect or an echo (when the time intervals are longer). Delay Sets the length of delay milliseconds. You can use values from 0 to nearly 1000 ms (equivalent to 1 second). Feedback Controls the amount of signal the delay will feed back into itself. As you increase this value, you will notice a more pronounced echo, until the feedback actually becomes louder than the original sound. Setting this too high can result in distortion. You can use values from 0 to nearly 100 per cent. Volume Sets the volume of the delay effect in decibels. Use values from 0 (full volume) to -8 (zero volume). See Also: Adding Effects in Real-time Adding Offline Effects Effects Tutorial